Machine Maintenance Module : Maintenance Software

QASoft : ERP
Software Solution

Machine Maintenance Module

• Machine Maintenance can be of two types, Periodic or preventive
  and Non-periodic such as breakdowns or planned changes in the
  machine. Maintenance activities are further divided in two
  groups: Electrical and Mechanical.
• Data collection includes man-hours used, machine-hours lost,
  spares parts used, spares-cost, other costs and details of the
  activity performed.
• Maintenance record is prepared against indexed list of
  maintenance activities enabling you to make detailed analysis
  and know repetitiveness of any problem.
• Machine History can be seen on-screen and printed with many
  filter options.
• Machine wise maintenance data analysis can be done to know loss
  in breakdown and preventive maintenance in machine-hours,
  maintenance man-hours, spares cost etc.
• Meets the requirement of clause 6.3 and 6.4 of ISO 9001:2008.

Calibration

• Calibration data entry is in the form of a check list, which
  requires you to verify items in the check list on the
  calibration report submitted by the calibration agency.
• You can perform validation of records in case instrument (or its
  range) is found out of calibration.
• During instrument selection in product inspection reports
  calibration due date is displayed to ensure that non-calibrated
  instrument is not used in calibration.
• Instruments for calibration are divided in two categories, one
  for instruments under control of quality assurance and other
  under the control of maintenance department.
• Calibration due report is available separately based on
  responsibility for calibration.
• Meets the requirement of clause 7.6 of ISO 9001:2008.